(incl. 1st year monitoring)
Billing starts after 1st year - averages to $0.49 / Day
This Sent.io™ is configured with two (2) 0-5V analog inputs for use with any sensor with a 0-5V output. Sensor power is provided by the Sent.io™, so there is no need for an external power supply. Sensor power is switched on prior to sampling to save battery life - the sampling dwell time is configurable to allow attached sensors to settle prior to sampling.
Samples are taken from both inputs every 5 minutes and reported to the cloud every 8 hours or when user defined alert thresholds are met.
Easy to install - just peel the adhesive backing and press onto a flat, horizontal surface. Once installed, wake it up with a magnet and verify the 3 LEDs are on.
Specification | Minimum | Typical | Maximum | Units |
Analog Input Range | 0 | -- | 5 | V |
Battery Life | -- | 10 | 20 | Years |
Sample Rate | -- | 5 | -- | Minutes |
Connectivity | -- | 4G CatM1 | -- | -- |
Sensor Power Supply | 17 | 18 | 19 | VDC |
Operating Temperature Range | -40 | -- | +80 | Degrees C |
Enclosure Rating | -- | IP67 | -- | -- |