(incl. 1st year monitoring)
Billing starts after 1st year - averages to $0.25 / Day
This Whisker.Block is configured with two (2) 4-20mA analog inputs. It can be used with any sensor with a 4-20mA output and it can power the sensor using an internal 18V switched power supply. This device can be used together with any of our other Whisker.Blocks to build a complete IoT monitoring solution. It samples data every 5 minutes and immediately communicates that data to a Smart.Hub™ LT. The Smart.Hub™ forwards the data to the cloud where it is stored and evaluated.
This Whisker.Block can be configured for internal battery or external DC power. When powered from internal batteries, the battery life is 10-20 years and the device sleeps between sampling periods. When powered from external DC power (or a MicroUPS), the device is always on and can be set to sample as fast as once every minute. NOTE: This part number is the battery powered version. Please contact us for other configurations.
Whisker.Blocks are easy to install - just peel the adhesive backing and press onto a flat, horizontal surface. Once installed, wake it up with a magnet and verify the 3 LEDs are on.
Specification | Minimum | Typical | Maximum | Units |
Analog Input Range | 4 | -- | 20 | mA |
Battery Life | -- | 10 | 20 | Years |
Sample Rate | -- | 5 | -- | Minutes |
Connectivity | -- | 900 Mhz Lora | -- | -- |
Sensor Power Supply | 17 | 18 | 19 | VDC |
Operating Temperature Range | -40 | -- | +80 | Degrees C |
Enclosure Rating | -- | IP67 | -- | -- |